At COMPUTEX 2023, KLEVV, an Essencore brand, showcased its latest innovations in memory and storage technology, highlighting advancements in DDR5 memory modules and PCIe NVMe SSDs.
KLEVV introduced two DDR5 memory modules: the CRAS V RGB and the BOLT V. The CRAS V RGB offers speeds of up to 8000 MT/s, while the BOLT V reaches up to 6800 MT/s. Both modules are compatible with the latest Intel and AMD platforms. Additionally, they support both Intel XMP 3.0 and AMD EXPO SPD profiles, facilitating easy overclocking for users. Notably, the CRAS V RGB comes with an RGB lighting effect, allowing users to synchronize it with other RGB-compatible devices through software.
One of the standout products from KLEVV’s showcase was the CRAS C950 PCIe Gen 5 NVMe SSD. Available in capacities of 1 TB, 2 TB, and 4 TB, this SSD utilizes a Phison E26-series controller combined with 3D TLC NAND flash. The CRAS C950 is capable of achieving sequential read speeds of up to 12 GB/s and sequential write speeds of up to 11 GB/s. To ensure optimal performance, the drive is equipped with a passive aluminium heatsink, designed to dissipate heat during intensive tasks.
For the mainstream market, KLEVV presented the CRAS C910 PCIe Gen 4 NVMe SSD. This SSD offers capacities up to 1 TB and is built with an InnoGrit IG5220 controller and 3D TLC NAND flash. The CRAS C910 can reach sequential read speeds of up to 5 GB/s and sequential write speeds of up to 4.8 GB/s. KLEVV offers two versions of the CRAS C910: a standard variant without a heatsink and the CRAS C910 RGB, which features a heatsink equipped with an RGB diffuser.
KLEVV’s participation in COMPUTEX 2023 demonstrated its dedication to advancing memory and storage technology. With the introduction of high-performance DDR5 memory modules and PCIe NVMe SSDs, KLEVV continues to address the needs of both enthusiasts and mainstream users in the tech industry.